How to Make Beaded Tassel Necklace with Pearls and Crystals.

How to Make Beaded Tassel Necklace with Pearls and Crystals.

Posted by Omo-Ola wireworks & beads

BBM: 33151489 or 09022430901

Yinkaomo@gmail.com

To get start, you will need:

NOTE: YOU CAN USE ANY TYPE OF BEADS AND COLOR

6MM Yellow Pearl Glass Beads

6MM Pink Pearl Glass Beads

4MM Pink Pearl Glass Beads

4MM Pink Czech Glass Beads

2MM Round Seed Beads

Tiger Wire

Jump rings

Lobster Clasp

Scissors

Flat Pliers

How to make beaded tassel necklace DIY?

1. Cut about 200cm tiger wire, remove the curved tips.

2. Slide six 6mm yellow pearl beads onto the wire, pass the wire back to the last pearl bead and tighten wires. Remember to keep one wire 190cm for the working wire.

Slide a 6mm pink pearl bead onto the wire, thread the wire to the first yellow pearl bead at right, and tighten wires.

3. Make the basic pattern A for the beaded tassel necklaces DIY

Slide four 6mm yellow pearl beads onto the wire again, pass the wire back to the second yellow pearl bead at right of the first bead circle as the video shows, and tighten wires.

Add a 6mm pink pearl bead onto the wire again, and pass the wire back to the first yellow pearl bead at right of the second bead circle and tighten wires.

Slide four 6mm yellow pearl beads onto the wire again, and repeat this basic pattern A to make another 16 patterns.

4. Start to make eleven beaded tassel 4. Start to make eleven beaded tassel Slide four 6mm yellow pearl beads onto the wire, pass the wire back to the second yellow pearl bead at right of last bead circle and tighten wires.

Add a 6mm pink pearl bead again, thread the wire back to the second yellow pearl bead of this bead circle and tighten wires.

Slide five 4mm Czech glass beads and four 4mm pink pearl beads onto the wire alternatively, add a 6mm yellow pearl bead and a round seed bead again, and then pass the wire back to the 6mm yellow pearl bead and previous beads until get to the first 4mm Czech glass bead. Now, you have got the first beaded tassel!

Continue to pass the wire to the two 6mm yellow pearls at right of the last bead circle.

Slide four 6mm yellow pearl beads onto the wire, pass the wire back to the second yellow pearl bead at right of last bead circle and tighten wires.

Add a 6mm pink pearl bead again, thread the wire back to the second yellow pearl bead of this bead circle and tighten wires.

Slide six 4mm Czech glass beads and five 4mm pink pearl beads onto the wire alternatively, add a 6mm yellow pearl bead and a round seed bead again, and then pass the wire back to the 6mm yellow pearl bead and previous beads until get to the first 4mm Czech glass bead.

This is the second beaded tassel.

Now, continue to make another four beaded tassels in the same method. The specific numbers and types of each beaded tassel are as follow:

The 3rd beaded tassel: seven 4mm Czech glass beads and six 4mm pink pearl beads alternatively, a 6mm yellow pearl bead and a round seed bead.

The 4th beaded tassel: eight 4mm Czech glass beads and seven 4mm pink pearl beads alternatively, a 6mm yellow pearl bead and a round seed bead.

The 5th beaded tassel: nine 4mm Czech glass beads and eight 4mm pink pearl beads alternatively, a 6mm yellow pearl bead and a round seed bead.

The 6th beaded tassel: ten 4mm Czech glass beads and nine 4mm pink pearl beads alternatively, a 6mm yellow pearl bead and a round seed bead.

Great! You have finished half of the beaded tassel necklace!

5. Make the rest half beaded tassel necklace in symmetrical with the other half.

6. Conceal the extra wires of both ends by pass the beading path.

7. Use jump rings to connect lobster clasp to both ends.

Congratulations!

This beaded tassel necklace DIY is over! It’s so elegant and unique! Just wear them with your suits or even the party dress. It will make you the one most standing out under the spotlights. Just have a nice try!